livigno

The snow factory, Carosello of Livigno

by
Drytech has built the new 5,600 m³ water tank, which will feed the cannons for artificial snow Close to the Carosello 3000 station in Livigno, with the Drytech White Tank Waterproofing.

Close to the Carosello 3000 station in Livigno, Drytech has built the new 5,600 m³ water tank, which will feed the cannons for artificial snow.

The work, built in 5 months with a 2’175 m² Drytech Tank, is completely underground to have no impact on the Alpine panorama.

The practicality of the construction of the Drytech Tank makes the construction of these structures faster.

Time is a decisive factor in any construction site, but it becomes even more important for applications conditioned by seasonality (the structure had to be ready in time for the opening of the ski season) and with a climate that reduces the useful building time to a few months.

Drytech Engineering has formulated a waterproof concrete suitable for environmental conditions, based on the characteristics of the aggregates present in the plant chosen by the Edil Dona company in Valdisotto, Sondrio.

The acrylic resin DRYflex, which waterproofs the details by pressure, is certified for use in structures in contact with drinking water, so it is safe for the environment and therefore perfectly suitable for use in a tank that feeds the guns of snow.

One of the main acceleration factors on the construction site is the control of shrinkage cracking.
In fact, the Drytech tank allows you to make continuous castings (the bed was cast in a single solution) because the cracks are induced by the Cracking Elements, which can also act as disposable formwork.

Client: Carosello 3000, Livigno

Project: Studio Associato DMP, Livigno

Structure: Ing. Piergiacomo Giuppani, Sondrio

Construction: EDIL DONA, Valdisotto

Drytech Tank: 2,175 m²

Olympic swimming pool, Livigno

by
The logo of the Livigno Olympic Federal Centre

Added to the hyper-training altitude of Livigno are the 50 precious meters of the “Federica Pellegrini Swimming Area”: the new Olympic swimming pool, built by TMG of Berbenno di Valtellina.

The new swimming pool has 12 competition model starting blocks (6 on each side), with 5-position track start platforms. With particular attention to the swimmer’s well-being and the environmental impact, the water is disinfected with a hypochlorite (with low chlorate content), produced on site with electrolytic salt transformation technology, which among other things allows the reduction of chlorination waste products.

The safety of the structure is also at levels of absolute excellence. The pool is in fact equipped with the Angel Eye system: 20 underwater cameras that record images of the swimmers in real time. The system is able to identify dangerous situations and, in the event of an alarm, sends a signal directly to the lifeguards’ smartwatch.

Drytech carried out the waterproofing of all the foundations of the building, all the perimeter walls and the recovery tanks, collaborating with the structural engineers right from the design phase. All these structures are in contact with the waters of the Federia stream, a tributary of Lake Gallo, whose flow varies depending on rainfall regimes and, above all, seasonal thawing phases.

Naturally the new Olympic pool of the Federica Pellegrini Swimming Area is open to the public. Inside the Aquagranda center you can also snorkel while admiring the fish on the seabed or travel to the interstellar stations of Mars, Moon and Venus. All this thanks to Divr: a new form of virtual reality that uses multisensory technology, amplified by immersion in water.

Ownership: Aquagranda, Livigno

Project: Architect Giovanni Colturi

Project collaborator: Geom. Demis Spiller

Structure: Eng. Fabio Fabiano, Varese / Engineer Marco Finazzi, Palazzolo Sull’Oglio / Eng. Fabio Sibaud, Como

Construction: TMG, Berbenno di Valtellina

Drytech Tank: 2,300 m2